Size guide

CHOOSE THE RIGHT WIDTH

Single width (150 cm)

Our one fixed curtain width is called single width and it is between 75-100 cm wide when fully extended.

When suspended is The wave curtain at least about 25 cm and at most 75 cm wide.

The pleated curtain is at least about 50 cm and at most 100 cm wide.

Single width is a good width for curtains when there is only a narrow part of the wall you want to cover, for example if it is a small room or an asymmetrical window that is close to the wall on one side.

If you have several windows next to each other, a single width can also be used to hang between the windows without there being too much fabric.

Double width (300 cm)

Our other fixed width is double width and it is between 150-200 cm wide when fully extended.

When suspended is The wave curtain at least about 50 cm and at most 150 cm wide.

The pleated curtain is at least approximately 75 cm and at most 200 cm wide.

Double width is a good width for curtains when you want to cover a lot of surface, for example if you want to cover an entire wall up to where the window begins.

Then you may need several curtains of double width that you hang next to each other.

If you have large windows, it is especially important to choose wide curtains, otherwise the curtains can look too minimalistic in comparison.

WAVE VS WEEKEND

HOW SHOULD I MEASURE?

For ceiling wave curtains

Floating

Measure the height from the ceiling to the floor and subtract 4 cm ( 2.5 for the depth of the curtain rail and 1.5 cm for it to float just above the floor).

Trailing

Measure the height from ceiling to floor and add 1 cm.

For wave curtains on the wall

Floating

Measure the height from the bottom edge of the curtain rail to the floor and subtract 1.5 cm (for the curtain to float just above the floor) .

Trailing

Measure the height from the bottom edge of the curtain rail and add 1 cm.

For ceiling blinds

Floating

Measure the height from ceiling to floor and subtract 1.5 cm (for the curtain to float just above the floor).

Trailing

Measure the height from ceiling to floor and add 1 cm.

For pleated blinds on the wall

Floating

Measure the height from the top edge of the curtain rail and subtract 1.5 cm (so that the curtain floats just above the floor).

Trailing

Measure the height from the top edge of the curtain rail and add 1 cm.